Kaimusailing

s/v Kaimu Wharram Catamaran

Vessel Name: Kaimu
Vessel Make/Model: Wharram Custom
Hailing Port: Norwalk, CT
Crew: Andy and the Kaimu Crew
About: Sailors in the Baltimore, Annapolis, DC area.
21 March 2024 | St. Marys, GA
01 March 2024 | St. Marys, GA
23 February 2024 | St. Marys, GA
15 February 2024 | St. Marys, GA
11 February 2024 | St. Marys, GA
06 February 2024 | St. Marys, GA
26 January 2024 | St. Marys, GA
14 January 2024 | St. Marys, GA
09 January 2024 | St Marys, GA
23 December 2023 | St Marys, GA
10 December 2023 | St Marys, GA
25 November 2023 | St. Marys, GA
17 November 2023 | St. Marys, GA
17 November 2023 | Somers Cove Marina, Crisfield, MD
03 November 2023 | Somers Cove Marina, Crisfield, MD
26 October 2023 | Somers Cove Marina, Crisfield, MD
17 October 2023 | Somers Cove Marina, Crisfield, MD
11 October 2023 | Somers Cove Marina, Crisfield, MD
04 October 2023 | Alice B. Tawes, McReady Pavilion, Crisfield, Maryland Eastern Shore
03 October 2023 | Alice B. Tawes, McReady Pavilion, Crisfield, Maryland Eastern Shore
Recent Blog Posts
21 March 2024 | St. Marys, GA

Just Add Water

The rainy weekend started off with overcast and fog but no rain. It looked like I might be able to get something done on the D4 dinghy. I wanted to change the bow seat which is really the bow deck. The sailing option uses the deck to hold the freestanding mast. I didn’t like how the deck looked, [...]

01 March 2024 | St. Marys, GA

D4 Dinghy Alternative Seats

The rain event was more wind than rain, strong winds with gusts up to 44 mph. We drove into town to see what the harbor was like. There was a small sailboat that had dragged anchor and was sitting close to shore. The tide was out. We left and played with Bleu at Notter’s Pond.

23 February 2024 | St. Marys, GA

D4 Inside Seams

Day two of the dinghy build started out with me finishing wiring the hull bottoms together on the centerline of the bottom panels. This was much easier than the wiring of the chine edges of the bottom panels and the side panels.

15 February 2024 | St. Marys, GA

D4 Dinghy Day One

A Wharram Pahi 26 had been anchored in the river nearby the boatyard and was hauled out with the travel lift. I went around to look at it and talked to the owner couple. I was surprised that it had been built in Martinique in 1988. The boat is more than 30 years old.

11 February 2024 | St. Marys, GA

D4 Redux

The inflatable (deflatable) dinghy I had bought was deteriorating. It had bottom seams separating. It is a West Marine branded dinghy made out of PVC. HH66 is the adhesive to reattach the seams. A friend had a similar problem and bought the same adhesive. I was waiting to hear from him how it worked [...]

06 February 2024 | St. Marys, GA

The Clincher

We decided to go to Amelia Island for the day, probably to the beach. Our plan to cycle around on the Raleigh 20’s seemed like a bad idea, Bleu can’t keep up with a bicycle for very long and when he quits he quits. So we would walk, where?, Fort Clinch State Park. She has a forever pass for Florida [...]

More About Kaimu

06 May 2009 | Chesapeake Bay
Andy / rainy
Actually Kaimu is not a stock Wharram catamaran, it was highly modified, based on a set of Narai MK IV plans. That would be a 41 foot boat, but the modifications increased the length and beam to 44X22 feet.

The Narai was directly descended from Wharram's original V hull catamaran, "Rongo", designed and built in the late 50's. Later came the Narai, MK I, MK II, and MK IV. The MK IV was a total redesign.

When Kaimu was conceptualized by Ernie Sparks in southern California, he discussed his stock Narai plans with someone in WIB Crealock's design office. They modified the plans and added a pilothouse and centerboard. Ernie was a meticulous carpenter and worked on the boat for about a decade. For some reason he changed his voyaging plans and sold the boat to a British engineer, also in southern California, Keith Lamb. Keith worked on the boat for about 3 1/2 years and replaced some of the structure with aluminum fabrications. This included the mast step, the central deck supporting structure, and cross tubes. Unfortunately he was killed while giving his welder flying lessons as part payment for construction.

That was when I became aware of the project and visited to do a survey.
Comments

About & Links

SailBlogs Groups