Jim Innes
03/21/2013, Captain's Cove Marina

Samson Validator 12 - 12 strand vectran installed... replacing 1 x 19 wire stay.
Parts from P2Marine.com

1 x Schaefer Double Jaw Toggle, 5/8" Pin
65 x Samson Validator 12 -5/16" -Black

Comments [0] | | More

Jim Innes
03/21/2013, Captain's Cove Marina

Harken traveler upgrade complete... All parts supplied by P2Marine.com Fantastic service!

2 x Harken 40mm Fixed Carbo Block
2 x Harken Stand Up Toggle w/Control Tangs
1 x Harken BB 32mm CB High-beam Traveler Track - 1.8M
1 x Harken Traveler Traveler End Control Set - 32MM Big Boat 6:1
1 x Harken BB 32mm HL CB Traveler Cars w/2 Toggles and 4:1 Controls
2 x Harken 75mm Block
1 x Harken Big Boat Hi-beam Trim Caps (Pair)
2 x Harken 40mm ESP Footblock
90 x Samson WarpSpeed -3/8"

Comments [0] | | More

Jim Innes
02/10/2013, Captain's Cove Marina

If a dirty bottom slows you down what do you think it does to your boat...

Comments [0] | | More

Jim Innes
12/11/2012, Paris, France

Just home from Paris... tres magnifique!

Comments [0] | | More

Jim Innes
11/28/2012, Captain's Cove Marina

http://video.msnbc.msn.com/nightly-news/50002132

Comments [0] | | More

Jim Innes
11/20/2012, Captain's Cove Marina

Ok it has started, traveler modification...
1. Ceiling panel removal
2. The removal of the Lewmar Ocean 2 traveler
3. Wiring improvements, including chafe protection and wiring quick terminal disconnects
4. Cutting bigger diameter access holes for fiberglassing and backer board installation
5. Fill existing fastener holes with epoxy and re-drill for new Harken high load traveler.
6. Install new traveler.

See Gallery for images.

Comments [0] | | More