Bookmark and Share
Caulking Wooden Deck
Sun Sep 20 0:01:00 EDT 2009, Navegantes, SC, Brazil

After the sting-like stuff has been put between the planks, a thick, hot liquid called asphaltum is poured into the space between the planks by the ever-smiling grandfather in the picture. The asphaltum is prepared by melting it in old paint cans over a wood fire.

Caulking Wooden Deck
Sun Sep 20 0:00:00 EDT 2009, Navegantes, SC, Brazil

To stop water going between the planks on the deck of my neighbor's wooden fishing boat, string-like stuff which expands when wet is pounded between the planks.

Paraty Igreja
Sat Sep 19 8:35:32 EDT 2009, Parati, RJ, Brazil

Just to break up the boat maintenance pictures, here is a church (igreja) in Paraty.

Sat Sep 19 21:28:03 EDT 2009 | George Conk
Looks just like the Church in my neighborhood in India! just north of Bombay 40 years ago where I was assigned to a Catholic! fishermen's coop in a town call Vasai.

There was a huge old fort built by Portuguese.

And I went fishing on boats like this:
- George
Mon Sep 21 9:59:10 EDT 2009 | Richard Hudson
Didn't realize you used to live in India, George. The boat in the link looks interesting.
Bars on the Windows
Wed Sep 16 11:06:59 EDT 2009, Navegantes, SC, Brazil

The windows in the pilothouse were old and getting hard to see thru (polycarbonate fogs up after a few years of exposure to sun), so they were replaced with thicker ones, and reinforcing bars were added to the middle of the window to make them stronger.

New Water Injection Elbow
Tue Sep 15 12:00:00 EDT 2009, Navegantes, SC, Brazil

To cool the exhaust, seawater is pumped into the exhaust system. It is done at a piece called a seawater injection elbow (since it is usually bent)--the odd-looking stainless steel piece in the picture of the back of the engine.

When I got the boat, there was a tiny leak in the seawater injection elbow, which really wasn't a problem...just put a small amount of water in the boat, but eventually it would rust out enough to put a lot of water and fumes in the boat, so I wanted to replace it at some point. It is hard to import parts into Brazil, and people are used to making more than ordering, so they made this one for me (and also a spare one, because the hot exhaust gases will eventually corrode this one also).

Tue Sep 15 19:47:19 EDT 2009 | george Ray
WOW! Great looking work. Please post detailed location for this yard.
Fri Sep 18 10:32:55 EDT 2009 | Richard Hudson
26 52.8'S, 48 40.4'W, a few miles up Rio Itajai, on the starboard side. Brazil chart Porto de Itajai (Brazil charts are freely downloadable from ).
Great boatyard
Mon Sep 14 19:32:26 EDT 2009, Navegantes, SC, Brazil

Now that I've been in this boatyard over a week, I can tell that I got lucky with the choice of boatyards. The boatyard I am in, Soldex Estaleiro, is great at getting stuff done correctly and on time. Communication is interesting, as I can barely speak Portuguese, but my neighbor kindly helps out with translations of many things.

In the picture, a new cleat (built from the stainless steel pole the old wind generator was mounted on) is being added.

Unloading Fish
Sat Sep 12 19:30:37 EDT 2009, Angra Dos Reis, RJ, Brazil

Besides being a transportation hub for the area around Ilha Grande, Angra dos Reis is also an active fishing port. Each fishing boat seems to own its own truck.

Sun Sep 13 5:53:08 EDT 2009 | George Ray
You seem to be liking Brazil pretty much. How does it compare/contrast with Uruguay/Argentina for boating folks in terms of cost and officialdom? Are you going to get some more Issuma shipyard work done and if so what projects are high on the list.
Mon Sep 14 16:22:27 EDT 2009 | Richard Hudson
Brazil is more expensive than Argentina and Uruguay.

In major ports in Brazil, there are four offices (Health, Immigration, Customs, Port Captain) that must be visited when entering or leaving a port. Some states don't make you go to all the offices, but most of the ones I've been to do.

Uruguay makes you check in by radio when passing each coastal radio station, but is otherwise easy on the officialdom. Argentina mostly just requires you to notify the coastguard within 24 hours every time you go to a different port.
Paraty Streets Dry
Thu Sep 10 18:41:03 EDT 2009, Parati, RJ, Brazil

I mentioned that the streets in Paraty flood at high water at spring tides. Here they are dry.

Paraty Streets Wet
Thu Sep 10 0:00:01 EDT 2009, Parati, RJ, Brazil

High spring tides "cleaning the streets".

Three Schooners in Paradise
Wed Sep 9 19:16:09 EDT 2009, Parati, RJ, Brazil

From left to right, Rapa Nui--a Brazilian schooner well-known for its Antarctic voyages, a nicely varnished tourist schooner, and Issuma.

Newer ]  |  [ Older ]


Powered by SailBlogs