SailBlogs
Bookmark and Share
Issuma
Piriapolis
Richard
Fri Oct 23 0:00:00 EDT 2009, Piriapolis, Uruguay

Ted steering off Piriapolis.

Piriapolis
Richard
Thu Oct 22 0:00:00 EDT 2009, Piriapolis, Uruguay

Issuma at anchor off Piriapolis.

Thu Oct 22 8:13:28 EDT 2009 | George Ray
How is the new dingy working out? It looks like it gets a real workout in this anchorage. Did you keep the folding dingy?
Looks great!
Fri Oct 23 7:21:24 EDT 2009 | Richard Hudson
Thanks. The new dinghy is not working out yet...needs modification before it can be rowed usefully. The inflatable dinghy has several holes that are in the process of being patched. The folding dinghy is still the only one that gets used :).
Piriapolis
Richard
Wed Oct 21 6:15:32 EDT 2009, Piriapolis, Uruguay

Piriapolis is a pretty resort town in Uruguay. It is popular among foreign yachts for its haulout facilities.

I stayed in Punta del Este for a day, where two of my new crew, Matt and Ted came aboard with the assistance of the ever-helpful Yacht Club Punta del Este. We then day-sailed in very pleasant weather to Piriapolis, then Montevideo (port of Buceo).

Sailing with experienced crew is a lot easier than singlehanding :).

Wed Oct 21 11:24:16 EDT 2009 | George Conk
Welcome to Matt & Ted.

Wish they had been there for the anchor flaling and the full force gale.

I suppose they'll have their chances in a maelstrom.
- George
Thu Oct 22 7:36:45 EDT 2009 | Richard Hudson
George, yes, crew would have been helpful during the gale and the anchor problems, and yes, I think they'll have their chance to see other gales.

Ben is now aboard also, so I have three crew!

Richard
A Full Gale
Richard
Mon Oct 12 0:00:00 EDT 2009

The picture is of the nice, downwind sailing conditions before the Force 9 (Severe Gale). I did not take the camera out or go to the bow while in the force 9 :).

After the anchor had been well-secured and I no longer had fears of it breaking loose, the forecast winds steadily increased. I was in deep water offshore, planning to cross the continental shelf (where the water is shallower) soon on the way to Rio de la Plata. The winds were forecast to be from behind me (NE) for a couple of days, strengthening to force 5, then 6, then 7. I felt it would be fine to be on the continental shelf for a force 7, but if it got to force 8 or above, it would be better to be in deep water, where the waves would be longer and less steep.

Despite really wanting to get into port quickly, I thought it would be prudent to stay in deep water in case the wind was higher than forecast. That was fortunate, as the forecast wind did increase to force 8 and 9 as the gale approached. The gale itself was force 9 for several hours, and force 8 for many more.

Gales are really not enjoyable...they are loud, wet and uncomfortable. I ran before the gale with a Galerider drogue, which is a kind of mesh bag that is designed to slow the boat down, not stop it. It was the first time I'd run before a real gale (previously I tended to heave-to), and the first time I'd tried using a drogue. It worked well enough, pulling the stern of the boat back when waves hit. Running before a gale seems to involve far more waves coming across the deck than heaving-to does, but seems a better way of handling bigger seas.

Everything on the boat held together, and after 18 hours the wind moderated and sailing became much more pleasant.

Mon Oct 19 14:42:35 EDT 2009 | yann
it seems that things are getting harder!!!

you can do it, and the boat can do it

friendly

Yann
Sun Oct 25 19:19:30 EDT 2009 | Paul Adison
Welcome Ben. Looking forward to following the trip.
Pleasant Sailing
Richard
Sat Oct 10 0:00:00 EDT 2009

I mentioned this has been an unusually busy trip. This has been due mostly to the number of things that broke. I wrote about the anchor breaking loose, and that was the worst of the problems, but there were others. There hasn't been a lot of pleasant sailing on this trip, but here is a picture of sailing in very nice conditions, late in the afternoon. As we get farther south, the days get longer, and the sunrises and sunsets are slower.

In benign conditions and safe waters, it is nice to have one glass of wine in the late afternoon. After spending all day hove-to, in an adverse current, going slowly backwards while securing the anchor, after I got sailing again, I decided it was time to celebrate the anchor being secure with a glass of wine.

As I was sipping the wine, it occurred to me that I was having a glass of wine when the windvane broke, and another when the fisherman sail ripped. I had not had time to fix either yet.

The wind continued to lighten, then died entirely. Frustrated that all day we had gone nowhere but about 10 miles backwards (due to the current), I decided to drop the sails and motor for a while.

Sails down, I turned the key and found that the engine would not start! Clearly, drinking wine was causing the boat to break! :)

So, no wind, no engine, current taking us in the wrong direction, past sundown, and being safely far offshore, the sensible thing to do was sleep--sail if the wind came up, otherwise just work on the engine in the morning. I tried to sleep, but kept thinking about the engine, and realized I could probably get it started with a boost from another battery. I did so, it started, and I motored for an hour to charge the starting battery. There is a master off switch for the starter motor on this boat (an odd thing to have), which I had forgotten to turn off when I left port, and that drained the battery.

After motoring for an hour, the wind came up, and we were able to sail again. The following day I was able to fix the fisherman and the windvane self-steering.

For the rest of the trip, I had no more wine, and nothing else broke :).

Sat Oct 17 21:43:42 EDT 2009 | Ben
Richard, you are clearly going to have to switch to rum!!! LOL
Anchor Secured for Sea
Richard
Fri Oct 9 0:00:00 EDT 2009

The anchor being lashed on by ropes and, later, chain to avoid the ropes being cut by the sharp edges of the anchor, as below, was enough to get through the near gale. No weather more severe was in the forecast, but I always try to have a plan for what to do if the wind gets two Beaufort Forces higher than expected.

My plan for the new anchor, if we got into a Force 9 (Severe Gale), was to disconnect it, unlash it and jettison it at sea. I really didn't like this idea--of throwing away a new and expensive anchor--but considering the damage that a loose anchor could do to the boat (especially the roller furlers, which I would need working later to continue sailing), if we encountered a severe gale, jettisoning the new anchor could be the least bad option.

As it was a light headwind day, the waves were quite small, and it was feasible to think about carefully moving the anchor and securing it better. I hove to and spent most of the day preparing and moving the anchor to the position in the above picture. I drilled a hole in the fluke and put a shackle in so I could tie a rope to the fluke and rotate the anchor up where it could be better secured.

The sharp edges of the Raya's shank were rapidly cutting into the plastic roller. By putting the anchor into a position where it only contacted steel, I hoped to avoid it cutting the plastic more (which would cause further movement as it cut away its support). So, after almost a days work (one needs to be very careful and ready to move quickly to work with an anchor on the bowsprit at sea as the boat is still going up and down in the waves), the anchor was well supported and secured with enough chains and ropes connected to shackles that I felt it was ready for a severe gale.

A few days later, there was a severe gale (Force 9), and I was very happy to have better secured the anchor, as it did stay in place. More about that later.

Tue Oct 13 16:55:21 EDT 2009 | george Ray
double OUCH!
Glad you got things sorted out for now. Rocna is in the process of developing a version of their anchor that disassembles into two pieces. it would make it a lot easier to have a BIG anchor and be able to stow it inside and down low when your out at sea. The Dashaw's keep a BIG Rocna in the bow of their boat but the cage that holds it is a beast. Seems that the Rocna 2-part should be hitting the market in the very near future. At the rate your voyaging you might just stop off in NZ and pick one up.

Dashaw bow:
http://setsail.com/wp-content/uploads/2009/10/fpb64-update-17-213.jpg
Anchor Breaks Loose in Near Gale
Richard
Mon Oct 5 0:00:00 EDT 2009

When I left anchor, no winds stronger than Force 6 (strong breeze) were in the forecast for the planned week-long sail. That changed when I got farther offshore, and the next day the forecast was steadily upgraded to Force 7 (near gale) and Force 8 (gale). Fortunately the wind was from behind, so running with the gale (instead of stopping for it) would be helpful.

A couple of hours into the near gale (F7), I heard the new anchor banging around and went forward to look at it. A tab that had been welded to the anchor to make it work with the anchor mounting system on the boat had broken off. Now the anchor was only held to it's mount by gravity, so when the boat hit the waves, the water pushed the anchor up and out of its mount. A heavy, sharp steel anchor is a really bad thing to have loose at sea!

I carefully lashed the anchor onto its mount with several ropes, taking care not to get pinched by the moving anchor. That was enough to get through the near gale, but only by re-lashing it later with more ropes and chain, as shown in the picture. A problem with the Raya anchor, which I had not understood before, is that the shank (the handle, not the part that grabs the seabed) is cut from a plate of steel, and the sharp edges from that cut were not rounded. When fitting the anchor, I noticed the sharp edges, but didn't think of them in terms of how to lash such an object at sea, because the sharp edges keep cutting through any ropes used to lash them. On my todo list now is grinding down all the sharp edges of the anchor.

As night fell, the sky suddenly cleared and the wind dropped. This happened really quickly, so I figured we were in some kind of eye of a localized part of the near gale. A few minutes later, a light wind picked up from the opposite direction, and rain clouds appeared. As it was getting hard to predict what the wind would do next, I lowered the one sail I had up and lashed the steering. Heavy rain followed, with much lightning and thunder, as I waited it out below. The boat is a pretty safe place to be in lightning, but only if one avoids touching metal, so it is much better to be belowdecks when in lightning.

The waves dropped quickly, which was nice, probably due to the relatively shallow water we were in. An hour later I was able to set more sails and get back on course in lighter winds.

I'm late in posting this because its been an unusually busy trip, of which I will write more about later.

Leaving
Richard
Sun Oct 4 0:00:00 EDT 2009

There was a lot of rain and consequent flooding in Navegantes/Itajai last week. The port was closed for a while, so I was late in leaving. On my first attempt to leave, a few miles downstream the engine over-temperature alarm went off and, having no easy place to anchor, and not having tested the new anchor handling system yet, I pulled alongside a steel fishing boat and tied up so I could shut off the engine and see what was wrong. In my haste to get the boat tied up and the engine off before it stopped itself, it wasn't the gentlest docking, but that is what strong boats are for :).

I checked the raw water impeller and cleaned the strainer (filter for taking debris out of the seawater that is used to cool the engine), which wasn't really dirty. I was pleasantly surprised that this seemed to fix the problem, as I didn't actually fix anything, but upon starting the engine again, the cooling system was working properly. The fishing boat I had tied to had to leave, and was nice enough to wait ten minutes for me to check the impeller and strainer. So I left and the fishing boat left. I continued down the river towards the sea, wondering what had really gone wrong with the cooling system, and if the problem would recur. As I approached the entrance (exit) of the harbor, a stiff onshore wind had come up, and from a distance I could see a fair amount of white water (breaking seas) near the entrance. Without getting closer I couldn't tell whether the sea was breaking in the entrance channel, or just beside it, but, given that I wasn't convinced I didn't still have a cooling system problem that could possibly cause me to lose the engine at a really bad time, I decided to turn back.

I motored back up the river, heading for the boatyard I had come from. Before I got there, I was passing my friend Fernando's other fishing boat (he has two fishing boats, one of which I was tied beside in the boatyard, the other of which was at another boatyard further downriver), and he was aboard, saw me, and invited me to tie alongside his boat. Knowing there is someone to throw docklines to when tieing up is always nice when you are singlehanded, so I tied up there instead. Everyone in the boatyard or on the fishing boat seemed interested in my boat, so came aboard for a look around (very few yachts come to this area...it is all working boats). Fernando asked his engineer to look at my engine, and he pointed out that I had air in the cooling system (this happened for several reasons and had been building up for a long time) which likely caused my overheating problem and showed me how to bleed it.

Late the next day, after finishing a few jobs, I left Brazil for the second time :). The engine worked fine, I motored out of the entrance in much less wind, and started to head south. Now that I was in the waves, the anchor started banging around badly, and as soon as I was in deep water, I tied it up to keep it from moving. A nice tailwind had come up, and I began sailing nicely south, but needed to sleep, so sailed onto anchor after only a few miles. It was a rolly anchorage, as I wasn't being picky, just wanted to sleep and then continue in the morning. The new anchor held fine, which I would expect it to, as it wasn't a particularly difficult anchorage for an anchor of that size.

In the morning I noticed the hydraulic steering cylinder was moving around a lot and I realized the bolts were loose. I tightened some of them, but needed to get to a quiet anchorage to get them all done properly. I also wanted to work on padding where the anchor was held to keep it from banging around. Fortunately, there were lots of good places to anchor around, so I sailed to Florianopolis, anchored there and did the repairs.

After doing a lot of stuff to a boat, it is common to do sea trials, to confirm what is working and what needs more attention. One way of doing sea trials is to provision for a journey, head to sea knowing where alternatives (anchorages, shelter, etc) are, and test and repair as necessary.

The following day, in a flat calm, I motored off the anchor and out to sea, in my third attempt to leave Brazil. Sometimes, you just have to keep trying :).

The picture is of Ilha Santa Catarina, seen from amidships. You can see the new dinghy is mounted upside down on the deck.

Mon Oct 5 5:52:18 EDT 2009 | george Ray
Curious to see pictures of the new dingy.
Mon Oct 5 16:48:10 EDT 2009 | Ben
I had an air lock in the fresh water side of my cooling system once. Not fun... Safe journey, fair winds. and I'll hopefully see you in Puerto del Buceo, Montevideo in a few more days.
Mon Oct 12 5:46:01 EDT 2009 | Christian
Hi Richard,
I saw the news on tv about the strong current at Navegantes that close the harbour. I and Fernanda were thinking about you and Issuma.
Good to know you are on your way.
Bons Ventos!
Pirate Ship
Richard
Wed Sep 30 0:00:00 EDT 2009, Navegantes, SC, Brazil

Its not everyday that you step out to see an overtaking Pirate Ship :).

Thu Oct 1 19:42:35 EDT 2009 | Ben
Arrrrr....
Itajai Igreja
Richard
Tue Sep 29 0:00:01 EDT 2009, Itajai, SC, Brazil

Another pretty church in Itajai.

Newer ]  |  [ Older ]

 

 
Powered by SailBlogs