S/V Eleuthera II

Just updated my USCG license to 100T Master and became an ASA instructor. Owner of a CSY Walkthrough. Stay Tuned, progress updates and pics to follow.

28 March 2017 | Peck Lake
07 February 2017 | Port Salerno Boatyard
19 November 2015
13 May 2015 | Port Salerno Boatyard
17 March 2015
19 February 2015
11 February 2015 | Stuart
28 August 2014
24 August 2014
11 June 2014 | Seabase ~ Islamorada
30 May 2014 | Florida Seabase Islamorada Florida
13 May 2014 | Islamorada, FL
27 October 2013 | at anchor, Peck Lake
19 February 2013 | Stuart, Florida
22 December 2012
13 December 2012 | still at the dock of course

A most enjoyable anchorage...

28 March 2017 | Peck Lake
doug
My wife and I decided it was time to make use of this magnificent boat and weather. Off we went to Peck Lake, just south of Stuart on the intracoastal waterway. The wind was blowing cool all day and night which makes for a very pleasant evening on the hook in the very protected anchorage. We spent 2 nights there just getting off the grid and relaxing. The trip also gave me the opportunity to try the upgrades to my dingy, a 8hp Tohatsu outboard with a Doel Hydrofoil fin. It does what it says, planes quicker with less rpm. Also, I used the trip to check on the new Sigmadrive I installed to the drive system of the boat. This also works as it says, less vibration and less worry about alignment. I'm still checking every few hours for loosening bolts / screws but at this poinbt, no problems.
We've decided to make better attempts at going for quick trips until we can figure out just how long until Rosie can retire. If only we could get good affordable health care!!

New Sigmadrive CV/Thrust Bearing addition & review.

27 February 2017 | Stuart, FL
The alignment process was tedious as usual and I found it nearly impossible to get the clearances I was shooting for. Not wanting to add unnecessary wear on the new drive components due to misalignment, I opted for a product I was not aware of until the internet search for a solution began. It's a Bruntons Sigmadrive sigmadrive
, a c/v joint with built in thrust bearing built for the marine industry in England. I also found the youtube video review from SV Prism to be very helpful.
video
The Stateside rep Rod was very helpful and had my order here within 4 days shipped DHL. I did ask if there was any chance of getting the price of $575 reduced and he offered a "boat show" discount of 10% bringing the price, including shipping to a little more than $500. I installed the part in about 3 hours and took her for a quick test drive of about an hour. I am happy to report that earlier vibrations were cut roughly in half at all operating RPMs. I also feel the noise level has been noticeably reduced. I'll post a follow up after more time on the water.

Repairing the repair.....

07 February 2017 | Port Salerno Boatyard
doug
It seems there was some work done on the prop shaft log by a previous owner many years ago, probably in Venezuela or other South American spot. I don't know why, but there was a 7" extension to the original log, maybe when the new engine was installed. The problem became apparent when the boat started taking on water due to the extension failing from a crack at the connection. It seems they just placed the extension up against the existing log and laid tons of resin around it. It took 3 days of grinding and chipping to remove it all. I repaired the repair by using a fiberglass splice tube epoxied between the new and old making sure the clearance remained at 1/4" around the prop shaft. After all was said and done, new parts included a new cutlass bearing, 1 1/2" shaft, stuffing box with GFO packing, and shaft coupling. As with every boat project, it took on a life of its own. I also replaced all motor mounts, all hose clamps, engine hoses and painted the bilge under the engine. The only item left to do is a final engine alignment. I'm shooting for clearances under .004. This will take a good day of tweaking of the motor mounts. Looking forward to getting back on the water....

Deck work done... now onto the center cockpit

18 April 2016
I must say, it looks great.

Now for the deck and teak... part 2

04 February 2016
Just a quick update on the progress, I wanted to see if the beautiful deck paint, non-skid and new varnished handrails would show in a picture worthy of the way they look. I think so.....
Vessel Name: Eleuthera II
Vessel Make/Model: 1981 CSY 44 Walkthrough
Hailing Port: Stuart, Florida
Crew: Doug Rosie Kate and Mel
About: Mostly the Family: Rosie, my wife. Now my daughters Katie and Melanie are away at college so maybe a bit more traveling... Sometimes other assorted folks.
Extra: 1981 CSY 44 Walkthrough. Eleuthera, a jewel of an island in the Bahamas "out islands" also, from the Greek; Eleuthera means Freedom ! NOW FOR SALE.
Eleuthera II's Photos - Abaco Bahamas 2011
Photos 1 to 20 of 20 | Main
1
Hopetown Light House in back of E2
Sunset on board
Stu and Robin
FSU Girls
Bahamas Ankle bracelets
Sunset at Man-O-War beach
Patriot
Rose
Todd Fishing
 
1

SV Eleuthera II IS FOR SALE !!! $120k

Who: Doug Rosie Kate and Mel
Port: Stuart, Florida