26 January 2009
Day three.
Step 5
Sanding.
Remove the new top from the dodger frame and move it to the dock. We did the rest of the lay up there. If epoxy is allowed to cure you must sand and wash the surface before you can continue to lay up additional layers of glass.
Step 6
Repeat steps 1-4.
We were really pushing it towards the end. We only had 1.5 gallons of Epoxy and we were getting a little nervous, but we finished with about 8 oz to spare.
Day 4
We let the top cure for 36 hours. In the mean time we cleaned and continued to pick off spots of resin from our bodies.