SailBlogs
Bookmark and Share
Swingin' on a Star
Ship's log for the circumnavigating Saint Francis 50 catamaran, "Swingin on a Star".
Relaxing at the Lodge
Randy
08/22/2008, Raiatea

It was another long day at the boat yard. I was having troubles getting Micron 66 locally and I had begun the unpleasant process of trying to identify a paint I would be happy with that didn't require a complete strip of the existing antifouling. The bottom had been painted only 10 or 11 months ago and it was in pretty good shape, I was loath to scrape it all off at $300 a can!

Just as I was digging through my Practical Sailors in earnest Valeria, the office manager came through with the 66 but in black. The paint on there was blue but hey, I'll take pink if it means a light sand and paint away. Better yet they could have it tomorrow! I guess Raiatea has a pretty good connection with Papeete.

In the mean time I prepped and painted the drive legs with Trilux. I used the spray can last time around but Dominic only had gallon cans of brush on. He let me borrow a little from an open can they had. The drive legs were black but of course the paint the yard had was white. The designer genes in me suggest that a blue hull with black drive legs make for the best fashion statement, but since I'm not looking to make a fashion statement and probably don't have any designer genes anyway a black hull with white drives will have to do.

I managed to get the zincs installed, the props prepped, lubed and installed, all with healthy doses of loctite.

Fred had the rudder shaft glassed back into the right side of the shell by the end of the day. The rudder project is a hurry up and wait affair. The shaft took a day to go to town, get in the press and come back. Then once the rudder shells are clean it has to be glassed in, which requires a four plus hour pause at the end for curing. Next the halves need to be glassed together, followed by curing. Then the beast needs to be faired and filled with foam. Then the foam holes are sealed and the rudder is primed, pause. Antifouling coat one, pause. Coat two pause. You get the idea. All of this with the majority being in epoxy for water protection and secondary bond strength.

I was trying to drive a Monday splash but it was looking tough. Still no bottom paint and no work on the new stickers, both big projects.

Back at the Raiatea Lodge Hideko and I enjoyed a sunset game of Patonk and another wonderful meal cooked up by Oliver. Eric and Oliver both try to teach me French at every turn. I am trying and making some progress but their English is too good to force the issue.

French Polynesia
In the Boatyard
Randy
08/21/2008, Raiatea

It was a standard day in the yard. I pulled our propane tanks and gas jugs for filling. I also pulled the props and zincs. The zincs were in pretty good shape but not good enough for me to skip the easy opportunity to replace them.

The Raiatea Carenage has a lot of the necessities but they didn't have Yanmar Zincs. Fortunately the Raiatea Marine shop, a whopping 5 seconds across the dirt, had Plastimo replacements for the Yanmars. They fit and they were zinc so I bought them.

The props were an interesting contrast. The port prop was brand new and installed maybe a month back in the water in Moorea. It already has some stuff on it. The starboard prop had two year old Prop-speed on it and was still clean as a whistle. If you have never used Prop-speed you might want to take a look. It is amazing stuff. The only person I have known not to be happy with it flagrantly ignored the application directions. It is a two step process with an etching primer and the paint after. You have to let the etch dry as per the instructions and you have to have the props totally clean when you start.

As I was messing about with the sail drives I noticed that the starboard drive had a spacer between the drive leg and the prop and the port didn't. At least it didn't now. Got me thinking about how we crossed the Pacific with no prop on the port shaft. Was it there when I checked into things in the Galapagos? Can't be sure. It had certainly gone missing somewhere. What are the odds of finding this little bit in French frickin' Polynesia? Not good.

I sought out the boss for this one. I told Dominic my situation and asked if he could source a part. The wheels turning in my brain: Let's see, two weeks for shipping because no one has the part, the distributor will only ship to a dealer in China who then needs to ship to Tahiti, where it will clear customs in 1to never many days, I will have to fly to Tahiti to escort the part through customs, two days to get back to Raiatea and in the end I will have paid $1,398 and worked for a month to get a $1 chunk of metal.

Dominic said let me see. Stuck his head in a tool box and said "here", as he handed me the exact part! Are you kidding me? I pinched myself the rest of the afternoon as I carefully sanded and polished the little metal ring.

French Polynesia
09/01/2008 | Kevin
Why do we always have to learn the hard way ;)
09/17/2008 | Randy
I ask myself that all too often...
The Raiatea Lodge
Randy
08/20/2008, Raiatea

We are greatly enjoying the lovely Raiatea Lodge. Oliver, Eric and their families have been wonderful hosts. They serve excellent coffee and baguettes with home made jams at 7AM everyday. Lunch is at noon and dinner is at 7PM and both are excellent French/Polynesian cuisine.

You can always stir up someone for a patonk game (popular in France and elsewhere, throw a small light ball and get close to it with bigger heavy ones). The grounds are lush Polynesian standard (watch out for falling coconuts). They have a nice pool, bikes, a great dock with boats for rent, and can set you up with all sorts of tours and excursions.

The dock has been great for us because it is much faster (and easier) to take the dingy to the boat yard than to drive. I am getting into a routine of coffee at 7, boat yard at 8 and home at 4. Hideko is enjoying the free wifi and getting caught up with her Mixi (the hip Japanese online social network). We enjoy a lovely dinner together at 7 and repeat.

Today at the yard we had the rudder shaft straightened as it was bent ever so slightly. Fred and I were impressed by the stocky build of the shaft. It will not be departing the boat without serious trauma.

I did a lot of work inside the boat today. It was hot with little breeze making it in through the escape hatches. The constant threat of rain (though in retrospect it almost never did in the yard) looming up in the highlands kept me from opening the over head hatches. On the bright side the solar panels were kicking out 20 plus amps at high sun. The rail angle actually helped produce more power! I once again find good reason to recommend our air cooled fridge and freezer, which hummed along on solar power unbothered by the fact that they are 15 feet up in the air.

The yard is all 220 so we are without shore power. I asked about a transformer but I got one of those, "I'll look into it", answers that you can interpret as "not going to happen".

French Polynesia
Raiatea Carnage Services
Randy
08/19/2008, Raiatea

Day one in the yard was fairly typical. I spent most of my time trying to make sure that everything with a lead time got started, that all of my projects that required a particular specialty had someone lined up and that everything in general got moving with an understanding that I wanted to be in the water a week earlier than I really thought possible.

Boat yards are boat yards. You are never the only client. There never seems to be a project manager looking out for your boat and its needs. Everyone tells you "no problem" and you rarely see results the same day promised. Perhaps it is because you are a captive client once you're there, I'm not sure. If you ever want to get you boat back in the water you have to figure out who the players are yourself and get after all of them in the morning and again in the afternoon of every day.

My idea of customer service comes from the financial services industry where the customer is king and the clientele are demanding if not brutal. Perhaps this is too harsh a standard, regardless we are dealing with the exact opposite end of the spectrum when discussing boat yards.

All that said, I think this is my favorite boat yard to date. We have had services performed in the USA, Turks and Caicos, (tried to with no luck in the) BVI, Saint Martin, Grenada and Trinidad. Here Dominic, the owner, is very knowledgeable and a straight shooter. He still yeses you a little and is sometimes hard to corner, but he is in the office much of every day, ultimately delivers, or at least tries, and tells you why he can't if there's a problem. In Grenada they just ignore you if they are late on a promise.

This yard also has Fred. He is the secret weapon as far as I can tell. Fred is very experienced and appears to be able to fix anything. Fred pulled our damaged rudder and had it split in two by the afternoon ready to inspect. He is the kind of guy who prides himself on his work and anything he is happy with you will be happy with.

The Tahitian guys working in the yard are also very friendly and helpful. You do need to stay on top of things if you need a better than average job done of something (like cleaning a degreasing the hull before new stripes are applied). If you spoke French this place would be almost perfect.

It is a boat yard and thus toxic fumes wafts through the air and you'd better be wearing shoes but it is better than many in these respects as it is small with only one travel lift slip and the rail adjacent to a limited amount of space on the hard.

I haven't really gotten used to the entire boat sitting on an angle yet. I have decided to save all non bottom related projects until we return to the water for this reason and the fact that oil is in the back of the pan, going up the rig is out, etceteras. I am presently hoping that in the following week we can get our rudder glassed up, painted and reinstalled, bottom prepped and painted, props removed cleaned, greased and reinstalled with fresh zincs and new Prop-speed, drive legs prepped and painted, sail drive oil changed, old (partial) stripes removed and new stripes installed as well as some canvas adjustments and other odds and ends.

Today we got the bottom pressure washed and sanded and the rudder is out and opened up. Many other items have been set in motion so we'll see how it goes.

French Polynesia
The Rails of Raiatea
Randy
08/18/2008, Raiatea

We got up at the crack of dawn this morning hoping to make Raiatea in time for an AM haul out. We raised our anchor and motored out of the sand bank into the Povai Bay. We decided to raise the main here. The winds were predicted to be light today, around 10 knots, and from the east. This would make exiting the pass, which is on the west side of the island, pretty easy. We left the jib put away until we got a better picture of the situation in the channel.

The pass was calm and we motored out and around toward the south side of Bora Bora. Once around the southwest point we made a direct line for the main western pass of Raiatea, just south of the Raiatea Carenage. This seemed to be exactly where the wind was coming from, as usual. We motored along at about 7 knots with the main helping some here and there.

It is about 21 miles from pass to pass and it took us the expected three hours with an hour on each side for negotiating the lagoons and passes. The channel between Raiatea and Bora Bora is protected from the southeast seas by Raiatea but anything from the south or southwest comes barreling right in. Fortunately there was little swell and the apparent wind never got over 20 knots. The Raiatea pass was well marked and eventless as was the lagoon transit.

We ended up on a mooring outside of the Carenage at about 10:00 but it was too late to haul until after lunch. We probably could have made it in the AM but we weren't sure we were in the right place. The Raiatea Carenage is right next to, and looks like the same facility as, Raiatea Marine. Raiatea Marine has a big sign on the roof that says "VHF channel 72". Unfortunately the person handling radio and pone for Raiatea Carenage didn't connect the dots when we described our location and the VHF 72 bit. After receiving some fairly suspect directions, along with a call back after lunch, we decided to stay on the mooring and get the hotel accommodations sorted out first.

We had called around a bit the prior week and settled on Raiatea Lodge. After touring Raiatea I can feel good about saying that it is the nicest place to stay on the island. They have a great little dock out front and the are a very short trip south from the Carenage, so Hideko and I just took the dinghy over.

We were greeted by Oliver, one of the owners, and shown to a lovely room with free wifi, hot water and aircon (no of these a given in FP). The grounds are lush and lovely and the hotel is a quaint boutique with only 16 rooms. It would be a prefect place for our week or two stay while Swingin' on a Star got her annual tune up.

Oliver explained to us that there are only two place that haul boats on Raiatea and both are right where we were parked. This information in hand we returned to the big boat and clarified things with the Carenage. We were indeed right in front of their shop, which is situated on the northwest side of Raiatea, between the main west side pass and the airport.

I had never done a rail system before so I was looking forward to the experience with a touch of trepidation. After our dinghy ride I noticed two hazards in the area. First, like many of the society island lagoons, the anchorages her are deep and many use moorings. There are moorings (most with boats) all around the area, and some don't necessarily clear the surface. Second there is a very shallow, as in above water at low tide, reef covering the entire south side of the Carenage ramp. In fact if you are south of track on the line into the ramp you will hit the rocks in anything but a dinghy.

I was on the radio with Dominic, who is the owner of the Carenage, and he talked me in. We approached north of the transit leading into the ramp. As we got over the rails I slowed the boat. I had to keep her moving a bit though because the wind was up a bit and we were pushing to the south. There were about four or five guys in the water and once close enough we quickly secured lines to the port bow and stern to keep the boat off of the reef. This involved a bit of hustling and some confusion as the guys working in the yard speak Tahitian and French.

Once the port lines were on we secured cross ties forward and aft, springs, and starboard lines. At this point I realized that there was no one in sight who could speak English. I continue to scold myself for not coming up to speed on other languages faster. I should really have conversational French down by now, but I don't. Nor Spanish. Nor Japanese, Nor Tahitian. Though bits of each are running through my head making things even more interesting.

Once secured to the car below the winch operator on shore begins to haul the car up the tracks. I noted that before things got moving my sounder read 2 feet. This really means a bit over three feet but I had still never seen the number 2 there before.

As the car moves forward it tows the boat through the water on the lines attached to it until the leading edge of the keel makes contact with the boards lashed to the car. At this point things stop and final adjustments are made to the boats position over the car through the lines. Once set they begin to actually haul the boat when the car advances. The winch is connected to the car via heavily greased cables on a 7:1 purchase, so things go nice and slow.

At some point in the process the keels go flat on the car. It you are lucky your boat will sit perfectly going up the grade this way. I doubt many have this luck. It is nice to have a balanced boat. For upwind sailing this means center of gravity in the middle of the boat, for downwind a lift aft of the middle. Regardless, most cats are going to be a little aft heavy. Even if they weren't lifting them at an angle would make them so. Point being most will pop a wheelie given the chance. We did.

The guys were swimming under the boat yelling at each other and I just have a vision of the trailing edges of the keels crunching down into the knotty wood of the slats mounted on the rusty metal of the rail car. I tried to discuss matters with one of the guys who spoke a tiny bit of English. He was not the senior guy and given the level of our discussion I was as likely to be misunderstood or misunderstand as to communicate. There was noting for it, so I put on a mask and jumped into the water.

The boat was definitely not sitting level on her keels. After a bit of discussion they blocked the starboard stern and continued hauling. I didn't like the look of things and almost had to start throwing things to get the winch operator to stop. "Stop" is apparently not the first English word in the course. After failing to communicate the need for blocks on the port and also failing to find Dominic, or any one else who spoke English, I decided to let them proceed as I watched the port side carefully. It was rocked way back on the keel bit not picking up at all like before. Two of the guys were actually hanging on the bow lines. I not sure what they thought this accomplished but I am very sure I didn't like it.

In the end she made it up to the top of the track without a problem. That said if I were to do it again I would require the following: 1) Someone who speaks English must be on station at all times during the haul out to communicate with the captain. 2) The port and starboard stern must be blocked in the water as soon as the keels are level on the car.

Careful? Definitely. Paranoid? Perhaps. Regardless, no one will be crying but you if a yard damages your boat. They also have to block the stern of your boat once it is at rest so why not just do it when it is most important, while the boat is moving up the track? After a rough opener I have come to have a strong respect for this yard, but more on that later.

It was late in the day by the time the car was locked in place at the top of the tracks and the boat was properly blocked. The railway setup here allows only one boat to be in port at a time. The rail can handle just about any 50 foot catamaran but I do know that they had to turn away a 60 footer. The rail could take her but there is a 100 foot steel power cat sitting in the yard right next to the rail that interferes with very wide (over 9 meter) boats. The power cat was a Maupiti shuttle that took a bit too much of a short cut one day and ended up on the reef.

Once everything was situated I grabbed an overnight bag and joined Hideko in the dink. It was a short 5 minute dinghy ride to Raiatea Lodge and a good nights sleep.

French Polynesia
Motu Tapu and the BBLRS
Randy
08/17/2008, Bora Bora

It is our last day in Bora Bora (sniff). We took a trip around motu Toopua to complete our explorations. At the northwest end of Toopua is motu Tapu. It is a private island (I believe owned by a hotel or two). The area between Tapu and Toopua is a popular anchorage. A little out in the open for my tastes but beautiful and flush with white sand for solid anchoring.

We stopped in at Tapu to play around in the water a bit. This is the island where we were married and so Hideko felt it appropriate to represent my wedding ring to me. I lost the original jumping off of a waterfall in Grenada (I never should have let that crazy guy Razmig talk me into that). Now the new ring is as official as the first. We walked around the island a bit but were politely asked to leave by the gardener (it is a private island). With that we set off back to Toopua.

On the way we saw a Lagoon 470 in the anchorage. It was Wakamizu! We knocked on the hull and Nirai appeared. It was great to see him again. He caught us up on their travels and we did the same. Su San and family were out and about in the dinghy. It was unfortunate that we would be leaving tomorrow without a real chance to catch up.

Our next stop was the Bora Bora Lagoon Resort and Spa. This was the last of the big hotels that we had yet to check out. Sure we love the undisturbed nature and the away from it all places, but there isn't really a lot of that in Bora Bora. Bora Bora is THE resort destination in French Polynesia. Go anywhere but the society islands if you want to get away from high density tourism.

The big hotels of Bora Bora are interesting in and of themselves though. They have lovely gardens, fantastic swimming pools, (typically) great food, and unique ways of integrating with the lagoons and motus around them. Many of these hotels are great architectural and landscape design achievements and we enjoy them for just this.

The Bora Bora Lagoon resort and Spa is very nice. The dock is unfortunately on the windward side of Toopua and it is pretty breezy there most of the time. As is often the case you have to be careful tying up because one side is very shallow.

The resort itself is starting to show its age. It was the premier resort when it opened and so there is still much to recommend it. The lunch place is a pool side bar but the food is very good and the pool is lovely. The grounds are covered with picturesque Polynesian gardens and ponds covered in lilies. The Spa is a big tree house nestled back in the gardens and they have tennis courts, sail boat, kayak and wind surfer rentals, along with all the rest.

As we returned to our dinghy we saw Su San from Wakamizu. We noticed the other dinghy at the dock when we tied up but it didn't look like Wakamizu's. They said the same thing about ours. We had both changed dinghies in Panama City and almost missed each other because of it. It was great to catch up with them if only for a few minutes on the dock.

With Toopua and a visit to the BBLRS completed we had only missed the Pearl Beach resort, which is isolated on its own motu just north of the pass. We were quite satisfied with our stay in Bora Bora regardless. We will always love this beautiful island and its amazing lagoon.

French Polynesia
Hotel Bora Bora
Randy
08/16/2008, Bora Bora

Our date for hauling out in Raiatea (Aug 18) is coming up. The wind has been blowing 20 knots from the southeast which is exactly where Raiatea is. It looked like we might get a day of northeast wind that would allow us to sail over but the forecast has changed and now it looks like a light wind day on Monday (our haul out day) is the best we can do.

In order to get setup for the crossing we decided to move back to the west side of Bora Bora, where the one pass into the lagoon is located. We are all the way down on the southeast side and there is no way to get a big boat around the south end at Matira Point so we have to go all the way back around (tracing the shape of a horseshoe). It is, of course, a beautiful trip but it does take a couple of hours.

We headed out of the Piti Aau anchorage at noon in order to have good light. We motored around the occasional coral head in the otherwise beautiful sand bottom anchorage and left the 8 foot water for the deeper water near the island of Bora Bora. Once in the 60 foot zone we headed north up the coast.

The passage along the east side of Bora Bora is well marked in the deep water. You can stay in 80 feet much of the way but there is a slightly harrowing 10 foot pass through a natural channel in the reef that you must follow to get back to the 30 foot basin on the motu side just north of the Four Seasons. From there you continue north and cruise over the 10 foot bottom back toward Bora Bora around the marks at the north end of the basin. From here on you are back on the Bora Bora island side in deep water again.

We decided to anchor on the sandy bank in front of the Hotel Bora Bora at the south end of Povai Bay. There are great spots with nothing but sand here ranging from 7 to 10 feet. The northern most bulge of the bank gets very skinny right at the edge, maybe 6 feet in places. There are deeper places to enter but we saw a monohull following us bump here. They ended up backing up and entering the bank farther east. There are coral heads along the edge in places and some rocks on the bank here and there (it is a big bank) so it is good to keep a careful eye on the water until you know where you are. There is also a nice snorkel spot at the west end of the bank with many shallow coral heads just northeast of the channel around motu Toopua.

Once settled we decided to visit the Hotel Bora Bora. This is the oldest of the big hotels on Bora Bora. It is also one of the few actually on the island, the new trend has been to build on the motus. The Hotel Bora Bora is also one of the pioneers of the over water bungalow.

We arrived at the dock and were impressed by all of the shallow coral and the multitude of fish just feet from the pilings (careful parking the dink!). Unlike many of the new hotels the HBB has had time to settle into the environment and looks much more a part of the surroundings, as opposed to an intrusion on them.

The grounds of the hotel are classic and beautiful. It is situated on a point with lovely beaches on one side and a coral lagoon on the other. Hideko and I made our way to the beach bar to get a late lunch, early dinner. We do this often because we really only eat one meal a day. Some cereal or what have you with coffee and a late lunch/early dinner is perfect for us. It also works well because at the end of a hard day of diving/snorkeling or whatever we can get out to visit a resort, eat a nice meal from the (typically less expensive) lunch menu after the crowds have left, watch the sunset and still get back to the big boat before the light fades.

We had a great time at the Hotel Bora Bora. We met a friendly young lady from Tahiti who was studying Hotel Management during the year and working at the hotel for her summer break. We discovered that our visit to the hotel would be our last also. The hotel is scheduled to be demolished in a month! We were both very sad to hear that this beautiful place and all of its history were to be destroyed.

The plan is to erect a modern hotel in its place over the course of two years. Apparently the old classic is having a hard time competing with the newer hotels. In particular, the HBB has no pool and no spa, both items to be amended with the new build out. It will be sad to see such a lovely landmark destroyed. Hopefully they will integrate some of the wonderful bits of the old hotel into the plans for the new one.

French Polynesia

Newer ]  |  [ Older ]

 

 
Powered by SailBlogs

copyright 2006, 2007, 2008, 2009 Randy & Hideko Abernethy, all rights reserved