MATTAMIKE
| Vessel Name: | MATTAMIKE |
| Vessel Make/Model: | O'DAY 30 |
| Hailing Port: | DUXBURY, MASSACHUSETTS |
23 March 2010 | North Plymouth Marine
27 August 2009 | DUXBURY
26 August 2009 | DUXBURY
20 July 2009 | Duxbury, MA
13 July 2009 | Duxbury Bay
10 July 2009 | Duxbury, MA
09 July 2009 | Duxbury, MA
Recent Blog Posts
23 March 2010 | North Plymouth Marine
Waiting for Winter to End
The weekend was beautiful, I had to check on the boat.
27 August 2009 | DUXBURY
DIESEL REPAIRED
I mentioned on the earlier blog that my diesel (universal m-20) would not
26 August 2009 | DUXBURY
PROVINCETOWN & BACK
With hurricaine Bill approching we were a little reluctant to set sail.
20 July 2009 | Duxbury, MA
Weekend Report 07/18-19/2009
Stayed close to home, worked on an electrical problem on the
13 July 2009 | Duxbury Bay
Heavy Winds from the South
Mattamike departed the bay Saturday morning with winds from the south at 6 - 10 knots. As the day wore on the winds rose to over 20 knots with white caps over most of Cape Cod Bay. The boat was traveling 6 - 7 knots easily but was hard to control. We were going to reef the main but as the winds increased [...]
Waiting for Winter to End
23 March 2010 | North Plymouth Marine
George
The weekend was beautiful, I had to check on the boat.
The shrink wrap held up pretty, except for the seagull ripping up a section
about two weeks ago. April 1st should be my official spring start date.
Attached is a photo of the shrink wrap job on the boat.
Not much to speak of over the winter, I did get a new temperature &
humidity gauge for the cabin.... That's all folks
The shrink wrap held up pretty, except for the seagull ripping up a section
about two weeks ago. April 1st should be my official spring start date.
Attached is a photo of the shrink wrap job on the boat.
Not much to speak of over the winter, I did get a new temperature &
humidity gauge for the cabin.... That's all folks
Comments
Gallery not available
