Meta Fog Reprise
Meta Fog Sails Again
| Vessel Name: | Meta Fog |
| Vessel Make/Model: | Baba 30 |
| Hailing Port: | St Paul, MN |
| About: | Just me and my family |
14 July 2019 | Apostle Islands National Lakeshore
11 July 2019
22 June 2019 | Port superior marina, bayfield, wi
05 June 2019 | Port superior marina, bayfield, wi
22 March 2019 | Bayfield, Wisconsin and Minneapolis, MN
Recent Blog Posts
14 July 2019 | Apostle Islands National Lakeshore
First Trip in Meta Fog!
This weekend we took Meta Fog out of the marina for the first time. We had a great trip!
05 June 2019 | Port superior marina, bayfield, wi
Meta Fog AFloat
For the first time in a few years, meta Fog is afloat.
22 March 2019 | Bayfield, Wisconsin and Minneapolis, MN
Meta Fog will Sail Again
Meta Fog has been resting in her cradle for a few years. But she's not decommissioned yet! My family and I are going to give this little cutter a new lease on life, and we hope to have her in the water before midsummer 2019!
Meta Fog AFloat
05 June 2019 | Port superior marina, bayfield, wi
Daniel Farrell
For the first time in a few years, meta Fog is afloat.
The engine is running well and the oil and filter changed. Nearly all lights are leds. The exhaust hose is replaced and a few other hoses. The water and propane systems are working. The teak decks and grates are scrubbed.
The mast is down for a complete repaint job; the old paint doesn't have a proper under coating and is starting to flake off. I'm stripping it and then painting with interlux interprotect, then prime kote, then one part polyurethane, as recommended by interlux.
After that, I just have to clean out the fuel tank and get the head working, and we'll be ready for cruising!
The engine is running well and the oil and filter changed. Nearly all lights are leds. The exhaust hose is replaced and a few other hoses. The water and propane systems are working. The teak decks and grates are scrubbed.
The mast is down for a complete repaint job; the old paint doesn't have a proper under coating and is starting to flake off. I'm stripping it and then painting with interlux interprotect, then prime kote, then one part polyurethane, as recommended by interlux.
After that, I just have to clean out the fuel tank and get the head working, and we'll be ready for cruising!
Comments
Gallery not available
