Prepking Dumps

Q. How do you access the Network Time Protocol configuration from the Element Manager main system navigation tree?
A. Security>Passwords
B. Tools>Date and Time
C. Security>Login Options
D. Tools>Call Server Initialization
Answer: B

Q. A customer is preparing to install the Linux base software on to the Commercial Off the prepking Shelf (COTS) servers. Which connection is used on the administering computer to install from the CD-ROM or DVD?
A. serial for both the IBM-X306m and HP DL320
B. ethernet for both the IBM-X306m and HP DL320
C. ethernet for the IBM-X306m and serial for the HP DL320
D. ethernet for the HP DL320 and serial for the IBM-X306m
Answer: A

Q. Nortel uses IPSec (IP Security) within various Communication Server (CS) 1000 Rls. 5.0 elements. IPSec provides a basis for the CS 1000 Intrasystem Signaling Security System (ISSS) solution. If you want to use ISSS in your Nortel system, what must you do?
A. Use a Secure Multimedia Controller.
B. Enable ISSS from the Call Server.
C. Nothing; ISSS is enabled by default.
D. Enable ISSS from the Signaling Server.
Answer: B

Q. When a Commercial Off the Shelf (COTS) server is deployed as a Signaling Server for a Communication Server 1000E network, which operating system is deployed?
A. Linux
B. VxWorks
C. Windows XP
D. Windows 2003 Server
Answer: B

Q. Your customer wants to prepking 922-099 configure Media Security for their Phase 1 IP telephones. You have turned on the "Always Secure" option in the Media Security window in Element Manager and clicked "Submit". You have also configured the CLS for all Phase 1 IP telephones to MSBT.
The documentation states that at this time a "secure" icon should appear on the IP telephone, indicating that Secure Real-Time Transport Protocol (SRTP) is used as the protocol. During a call, the icon does not appear, and the call does not appear to be secure.
Why has this happened?
A. Media Security only works with Phase 2 IP telephones.
B. You selected the wrong secured number of packets (NKEY).
C. You did not set the Media Security System Default for the TN.
D. You changed the default on the Session Key Validity Time (TKEY).
Answer: A

Q. While attempting to log into a Communication Server 1000 Rls. 5.0 system using Element Manager, you receive the following message:
WEB3003: Destination IP address cannot be reached, initial RPC fail.
Which signaling server command will verify that both the ELAN link is established and the Call Server IP address is correct?
A. Use stat elnk from Overlay (LD) 137.
B. Use pbxLinkShow from "oam>" shell of the Signaling Server.
C. Use the stat elnk command from "oam>" shell of the Signaling Server.
D. Use the itgCardShow prepking command from the "oam>" shell of the Signaling Server.
Answer: B

Q. A customer has recently deployed a Communication Server 1000 Rls. 0 system. While verifying the system configuration, you find that the customer inadvertently failed to change the default IP address of the Call Server Ethernet Link (ELNK) host. After modifying the ELNK host, which Overlay (LD) is used to re-enable the ELNK?
A. LD 17
B. LD 97
C. LD 117
D. LD 137
Answer: C

Q. A customer has recently deployed a Communication Server 1000 Rls. 5.0 Branch Office solution. You want to verify that the onsite technician has enabled and defined the Network Connection Server (NCS) parameters correctly. Which Network Routing Service link should you access to view the NCS settings?
A. NRS server
B. tools
C. endpoints
D. H323 GW settings
Answer: D

Q. A company has a multi-site Communication Server 1000 Rls. 5.0 system located in Mexico. There are two sites serving as a Main Office (MO) with three Branch Offices each. All systems are networked via a managed IP backbone. You have just received a trouble report indicating a network failure at one of the MO locations. Where can you configure the Public Switched Telephone Network (PSTN) as an alternative route to maintain inter-office communications until the network failure is addressed?
A. in Overlay (LD) 14 (trunk definition) using the CLI
B. in Overlay (LD) 16 (Route Data Block) using the CLI
C. in Overlay (LD) 86 (Route List Block [RLB]) using the CLI
D. in the Gatekeeper Server using Gatekeeper Element Manager
Answer: C

Q. A customer has installed a prepking 922-098 Communication Server 1000 Rls. 5.0 system with 800 IP telephones. All telephones at the site are registered to a single stand-alone Signaling Server. This site has three media cards installed. During peak hours, the customer reports IP telephone registration failures. What would you add to the network to ensure full redundancy for IP telephones?
A. a redundant Call Server
B. a Layer 2 ethernet switch
C. TPS Follower Signaling Server
D. additional DSP resources in the form of daughterboards or VGMC cards
Answer: C